TM 9-2350-247-34
REPAIR MULTIPIN CONNECTORS Continued
0006 00
REMOVE CABLE CONNECTOR
NOTE
Use same procedure for repairing single or multiple lead, and male or female cable connectors.
1.
Loosen retaining nut (1) from plug (2). Slide nut back on cable (3).
2.
Pull grommet (4) with contacts (5) from rear of plug (2).
3.
Remove plug (2) and coupling nut (6) from cable (3).
4.
Push leads of cable (3) into grommet (4) until contacts (5) are fully exposed on other side of grommet. Clip or desolder
leads from contacts. Discard contacts.
5.
Remove grommet (4) and retaining nut (1) from cable (3).
0006 00-5