TM 9-2350-247-34
ADJUST ENGINE AND TRANSMISSION STAND (M548A3) Continued
0052 00
4.
The lower rear side of the transmission should be against the edge of the transmission support stop (1).
5.
Release all tension on the power plant sling. Remove the power plant sling from the power plant (2).
6.
Loosen two jam nuts (3) securing beam assembly (4) to main frame (5). Loosen two screws (6) that hold transmission
support (7).
7.
Turn each leveling screw (6) until the transmission support (7) is supporting the bottom of the transmission (8). All three
contact points of the engine support should still be supporting the engine.
0052 00-3