REPLACE SERRATED LOCK RING SCREW THREAD INSERTS Continued

REPLACE SERRATED LOCK RING SCREW THREAD INSERTS

Table 1. SERRATED LOCK RING SCREW THREAD INSERT TECHNICAL DATA

TM-9-2350-247-34 Carrier Cargo Tracked 6 Ton M548A12350010969356 (EIC: AEU) M548A3 2350013696081 (EIC: AE9) Manual
Page Navigation
296

TM 9-2350-247-34 REPLACE SERRATED LOCK RING SCREW THREAD INSERTS — Continued 0035 00 4. If lock ring does not come out with insert, hit ring with a punch and hammer to collapse ring. Remove ring. INSTALLATION 1. Install insert in threaded hole. Use a cap screw or bolt and a hex nut. NOTE Lock ring must be flush or no more than 1/32 inch (0.8 mm) below hull surface. 2. Install lock ring. Use a hammer and a flat piece of steel. Drive straight into surface. 0035 00-2

Privacy Statement
Press Release
Contact