TM 9-2350-247-34
REPAIR TRACK TENSION ADJUSTER Continued
0033 00
NOTE
Packing set may be a five or seven piece design.
10. Remove retaining ring (11), bearing (12), and five (or seven) packings (13) from piston (10). Discard packings, bearing,
and retaining ring.
11. Remove bleeder valve (1) and lube fitting (9) from cylinder (3).
12. If damaged or worn, press sleeve bushing (14) from cylinder (3). Discard bushing.
13. If damaged or worn, press sleeve bushing (15) from piston rod (2). Discard bushing.
INSPECTION-ACCEPTANCE AND REJECTION CRITERIA
1.
Check threads of piston and piston rod. Chase damaged threads with a die. Replace parts as a matched set if the threads
of either part are stripped or worn.
2.
Check parts shown in figure below that have reference letters.
3.
Check the parts dimensions with chart below to determine replacement.
0033 00-4