TM 9-2350-247-34
REPLACE RADIO RECEPTACLE/HEATER WIRING HARNESS Continued
0024 00
INSTALLATION
1.
Place radio receptacle and heater wiring harness (5) in cab and thread bus bar end of harness through opening for battery
compartment grommet (13).
2.
Position battery lead (12), circuit 49 lead (11), circuit 2 lead (10), radio receptacle and heater wiring harness circuit 48
lead (9), and circuit 400C lead (8) (if cargo area heater is installed) and secure with screw (7) and nut (6).
3.
Position radio receptacle and heater wiring harness (5) and power wiring harness (4) on battery compartment floor.
Secure with two battery compartment clamps (3), new lock washers (2), and screws (1).
4.
Install new split battery compartment grommet (13) to secure radio receptacle and heater wiring harness (5) in battery
compartment bulkhead.
0024 00-7