TM 9-2350-247-34
REPAIR FAN ASSEMBLY (M548A3) Continued
0015 00
5.
Install washer (9) and nut (10) on shaft (8). Tighten nut (10) to 27-32 lb-ft (37-43 Nm) torque.
6.
Bend one edge of washer (9) against nut (10) and one edge against fan (7).
7.
Install fan housing (11) on support (2). Secure with six screws (12), two screws (13), eight washers (14), new lock
washers (15), and nuts (16).
8.
Install cover (17) on fan housing (11). Secure with four screws (18), new lock washers (19), and washers (20).
FOLLOW-THROUGH STEPS
1.
Install fan drive housing and shaft in fan assembly (see your -20).
2.
Install fan assembly in carrier (see your -20).
END OF TASK
0015 00-4