TM 9-2350-247-34
REPLACE ENGINE THERMOSTAT (M548A3) Continued
0013 00
INSTALLATION
NOTE
Install thermostat in housing in position shown.
1.
Put a thin coat of sealing compound on both sides of new gasket (1).
2.
Install new seal (2), gasket (1), and thermostat (3) in left thermostat housing (4).
3.
Secure left thermostat housing (4) and right thermostat housing (5) with four screws (6), new lock washers (7), and flat
washers (8). Torque screws to 180-240 lb-in (20-27 Nm).
4.
Install hose (9) on right thermostat housing (5). Secure with two clamps (10).
5.
Install hose (11) on deaeration elbow (12). Secure hose on deaeration tube (13) and elbow (12) with two clamps (14).
6.
Install hose (15) on elbow (16). Secure with clamp (17).
0013 00-3