TM 9-2350-247-34
REPAIR RADIATOR Continued
0012 00
TEST RADIATOR FOR LEAKS
WARNING
Radiator can burst if over pressurized. Do not exceed 25 psi (172 kPa) air pressure. Ensure
radiator is submerged before applying air pressure. Always wear safety goggles.
1.
Plug radiator outlet opening (4), filler opening (5), and vent openings. Use radiator test plug set.
2.
Connect regulated air supply from radiator test stand to inlet opening (6).
3.
Submerge radiator in radiator test stand. Apply 20-25 psi (138-172 kPa) air pressure to radiator.
4.
If air bubbles appear, repair radiator Steps 1 - 6 .
0012 00-3