TM 9-2350-247-34
REPLACE ENGINE (M548A3) Continued
0008 00
37. Install pulley (18), six washers (19), new lock screws (20) on engine. Torque bolts to 52-56 lb-ft (71-76 Nm) torque.
38. Install and adjust fan drive belt (see your -20).
39. Install bracket (21) with regulator (22), two washers (23) and screws (24) on engine. Torque screws to 372-396 lb-in
(42-45 Nm) torque.
40. Install two washers (25) and screws (26) in bracket (21). Torque screws to 264-288 lb-in (30-33 Nm) torque.
41. Connect regulator cable (27) and power cable (28) to regulator (22).
0008 00-20