TM 9-2350-247-20-3
REPLACE SPEEDOMETER CABLE HOUSING AND ADAPTER Continued
0517 00
4.
Pull speedometer cable housing (1) through grommet (12) located in bulkhead (13) and out of carrier.
5.
Remove grommet (12) from bulkhead (13). Discard grommet.
6.
Remove four screws (14) and tablock washers (15) from left final drive shaft adapter (2) and final drive (16). Discard
tablock washers.
7.
Remove left final drive shaft adapter (2) and preformed packing (17) from final drive (16). Discard preformed packing.
0517 00-2