TM 9-2350-247-20-3
REPLACE 7.62 MM MACHINE GUN MOUNT Continued
0515 00
ASSEMBLY
1.
Place cradle (1) on platform (2). Install three screws (3). Secure screws with new lock wire (4).
2.
Place platform (2) and cradle (1) on pintle (5). Make sure pivot holes are aligned.
3.
Install washer (6), screw (7), and nut (8) to secure platform (2) and cradle (1) on pintle (5). Tighten nut by hand.
4.
Back nut (8) off to align notches with hole in screw (7). Install new cotter pin (9) in nut.
5.
Place holder (10) on cradle (1). Secure with four screws (11) and new lock wire (12).
0515 00-3