TM 9-2350-247-20-3
REPLACE ENGINE COOLANT HEATER EXHAUST SYSTEM (M548A1) Continued
0480 00
REMOVAL
1.
Remove three nuts (1), lock washers (2), screws (3), and hood (4) from exhaust pipe (5) and exhaust pipe (6). Discard
lock washers.
2.
Remove three screws (7), six washers (8), lock nut (9), and two clamps (10) that secure exhaust pipe (5) and exhaust pipe
(6) to two weld nuts (11). Discard lock nut.
3.
Remove clamp (12) and exhaust pipe (5) from exhaust pipe (13).
4.
Remove clamp (14) and exhaust pipe (13) from coolant heater (15).
5.
Remove clamp (16) and moisture trap (17) from exhaust pipe (13).
0480 00-2