REPLACE ENGINE COOLANT/VEHICLE COMPARTMENT HEATER EXHAUST PIPES
GUARD (M548A1) Continued
When installing double angle brackets and mounting brackets on heater exhaust pipes, make
sure mounting brackets on upper part of exhaust pipes are facing up, and mounting brackets on
lower part of exhaust pipes are facing down.
Install two upper double angle brackets (3) and mounting brackets (1) on heater exhaust pipes (7) so bottom of each
mounting bracket is 3 3/4-4 inches (9.5-10.1 cm) from top of exhaust pipes with three screws (8) and new lock nuts (9).
Finger tighten nuts only.