REPLACE INSULATED CARGO COVERS Continued
Make sure cover is clean and dry when it is folded and stored. If it is dirty or wet, it could
mildew and rot.
To remove bows, if damaged, see (WP 0417 00).
To install bows, if removed, see (WP 0417 00).
Place cargo cover (1) over four bows (2). Place front and rear pockets over ends of material handling kit beam (3).
Escape hatch will be at right rear of carrier.
Secure cargo cover (1) to four bows (2) with nine cover tie ropes (4).
Fasten inside tiedown ropes (5) to inside tiedown hooks (6) on bulkhead (7). Pull rope until front flaps of cargo cover (1)
are in place. Tie rope securely.
Tuck tiedown rope ends between rope (5) and bulkhead (7).
Lower curtains (8). Fasten four curtain straps (9) to inside of cargo door (see your -10).
Tie three ties (10) (front and rear) on inside of cargo cover (1) to close flaps.
Fasten three web straps (11) (front and rear) on outside of cargo cover (1) to secure flaps.
Fasten four outside tiedown ropes (12) on sides and rear of carrier. Tie ropes securely to tiedown hooks (13).
10. Tuck tiedown rope ends between rope (12) and bulkhead (7).
END OF TASK
0466 00-3/4 blank