TM 9-2350-247-20-3
REPLACE VEHICLE COMPARTMENT HEATER EXHAUST METAL HOSE ASSEMBLY
(M548A3) Continued
0437 00
6.
Install clamp (1) on metal hose assembly (2).
7.
Install two clamps (3) on metal hose assembly (2). Insert end of metal hose assembly through hull and secure with two
washers (4), new lock washers (5) and screws (6). Have helper assist.
8.
Insert metal hose assembly (7) into metal hose assembly (2) and clamp (1). Tighten clamp. Secure metal hose assembly
to two hull weld nuts with two clamps (8), washers (9), new lock washers (10), and screws (11).
0437 00-5