TM 9-2350-247-20-3
REPLACE BILGE PUMP DISCHARGE TUBES AND HOSES (M548A3) Continued
0426 00
REMOVAL
NOTE
Remove only those hoses and tubes to be replaced. Remove hoses and tubes with clamps
attached. Put clamps on replacement hoses and tubes before installation.
1.
Remove two clamps (1) and hose (2) from outlet tube (3).
2.
Remove two screws (4), lock washers (5), and clamps (6) securing outlet tube (3) to hull. Discard lock washers.
3.
Remove two clamps (7) and hose (8) from outlet tube (3) and tube (9). Remove outlet tube from carrier bottom plate.
4.
Remove screw (10), lock washer (11), and clamp (12) from tube (9). Discard lock washer.
5.
Remove two clamps (13) and hose (14) from tube (9) and adapter (15). Remove tube, hose, clamps, and attaching
hardware from carrier.
0426 00-2