TM 9-2350-247-20-3
REPLACE WINDSHIELD WIPER MOTOR Continued
0420 00
REMOVAL
1.
Pull nipple (1) away from screw (2). Remove screw (2), two washers (3), lead (4), and capacitor lead (5) from
windshield wiper motor (6).
2.
Remove screw (7) and capacitor (8) from weldnut (9).
3.
Remove tension clip (10), washer (11), and link (12) from pivot post on windshield wiper motor (6).
4.
Remove three screws (13) and six lock washers (14) that secure windshield wiper motor (6) to bracket (15). Remove
lock nut (16), screw (17), and clamp (18). Discard lock nut and lock washers.
5.
Lift windshield wiper motor (6) from carrier.
0420 00-2