TM 9-2350-247-20-3
REPLACE WINCH POWER TAKEOFF CONTROL (M548A1) Continued
0414 00
INSTALLATION
1.
Thread outer control cable (1) through jam nut (2), washer (3), and opening in range selector housing (4). Install jam nut
on control cable a few turns but do not tighten.
2.
Install new grommet (6) on cab floor. Thread outer control cable (1) through grommet.
3.
Install clamp (7), washer (8), and screw (9) to secure outer control cable (1) to bulkhead inside cab.
0414 00-3