REPLACE PIVOT STEERING BRAKE CONTROLS/LINKAGE (M548A1) -- Continued
Install master cylinders on pivot steering assembly as follows:
Align two master cylinder clevises (1), with left and right outer shaft levers (2). Install two outer shaft clevis pins
(3) to secure clevises to right and left outer shaft levers. Install two new cotter pins (4) through two outer shaft
Install two new bellows (5) on two master cylinder clevises (1).
Install two master cylinders (6) on pivot steering support (7). Install six screws (8) and new lock nuts (9) to secure
two master cylinders to pivot steering support (7).
Install two elbows (10) and new preformed packings (11) on two master cylinders (6). Tighten two jam nuts (12) to
secure elbows to master cylinders.