REPLACE PIVOT STEERING BRAKE CONTROLS/LINKAGE (M548A1) -- Continued
Remove master cylinders from pivot steering assembly as follows:
Loosen two jam nuts (1) and remove two elbows (2) and two preformed packings (3) from two master cylinders
(4). Discard preformed packings.
Remove six lock nuts (5) and screws (6) securing two master cylinders (4) to pivot steering support (7). Discard
Remove two master cylinders (4) from pivot steering support (7). Remove two bellows (8) from two master
cylinder clevises (9). Discard bellows.
Remove two cotter pins (10) from two outer shaft clevis pins (11). Remove two outer shaft pins from two master
cylinder clevises (9) and left outer shaft lever (12) and right outer shaft lever (13). Discard cotter pins.