REPLACE T150 TRACK ROAD WHEEL -- Continued
Lift track assembly with bar. Place two road wheels (1) on road wheel arm (2). Secure loosely with eight washers
(3) and new lock nuts (4).
Unblock carrier (see your -10).
You can be hurt if road wheel lifter slips while road arm is being lowered. Stand clear.
Start engine (see your -10). Place range selector in RANGE 1. Slowly drive carrier forward off lifter (5). Remove lifter.
Failure to set the parking brake and block the road wheels can allow the carrier to move and
could result in injury or death. Always set the parking brake and block road wheels before
working on the carrier.
Remove two T-nuts (6), screws (7), flat washers (8), and retainer (9) from lifter (5) and remove road wheel lifter
assembly from track.
Block carrier (see your -10).
TIGHTEN EIGHT LOCK NUTS (4) TO 150-170 LB-FT (203-230 NM) TORQUE. Use torque wrench.