TM 9-2350-247-20-2
REPLACE IDLER WHEEL HUB/BEARINGS AND SEALS -- Continued
0355 00
2.
If removed, install new bolt(s) (7) in idler wheel hub (4).
3.
Apply light coat of sealing compound primer and sealing compound to threads of relief valve (6) and grease fitting (5).
Install valve and fitting in idler wheel hub (4).
4.
Pack inner bearing (2) with grease. Install inner bearing in rear of idler wheel hub (4).
5.
Apply light coat of sealing compound primer and sealing compound to outer surface of new seal (1).
6.
Install seal (1) in idler wheel hub (4). Use ring spacer.
0355 00-4