TM 9-2350-247-20-2
REPLACE ROAD WHEEL HUB -- Continued
0352 00
2.
If removed, install new bolt(s) (4) in road wheel hub (3).
WARNING
Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These
compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you
dizzy and irritate your eyes and throat.
Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes.
Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves.
3.
Apply a light coat of sealing compound to threads of relief valve (5) and grease fitting (6). Install valve and fitting in
road wheel hub (3).
4.
Pack inner bearing (7) with grease (WP 0128 00). Install bearing in rear of road wheel hub (3).
WARNING
Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These
compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you
dizzy and irritate your eyes and throat.
Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes.
Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves.
5.
Apply a light coat of sealing compound to external surface of new seal (8).
Install new seal (8) in road wheel hub (3). Use ring spacer.
6.
0352 00-4
Change 1