TM 9-2350-247-20-2
REPLACE ROAD WHEEL SUPPORT ARM, HOUSING, BEARINGS,
0351 00
AND SEALS -- Continued
Remove six screws (1), three nut locking plates (2), seal (3), retainer (4), and gasket (5) from housing (6). Discard nut
3.
locking plates, seal and gasket. Use remover and replacer.
Remove support arm (7), seal (8), and spacer (9) from housing (6). Discard seal.
4.
If needed, remove two bearings (10) from housing (6). Use remover and replacer. Discard bearings.
5.
Remove lubrication fitting (11) and relief valve (12) from support arm (7).
6.
INSPECTION-ACCEPTANCE AND REJECTION CRITERIA
1.
Check fitting and relief valve for wear and damage.
2.
Check bearing. See TM 9-214.
Change 1