TM 9-2350-247-20-2
REPLACE BRAKE CONTROL LINKAGE (M548A3) -- Continued
0348 00
REMOVAL
1.
Remove cotter pin (1), washer (2), and pin (3) from parking brake cable stop (4) on shaft (5). Discard cotter pin.
2.
Remove spring (6) from hull bracket and brake pedal (7).
3.
Remove lock nut (8) and washer (9) from end of shaft (5). Discard lock nut.
4.
Remove lock nut (10) and washer (11) from end of shouldered shaft (12) in power plant compartment. Discard lock nut.
5.
Remove two cotter pins (13), washers (14), and pins (15) securing link (16) to connecting link (17) and shaft (5).
Discard cotter pins.