TM 9-2350-247-20-2
REPLACE DIFFERENTIAL OIL FILTER AND OIL FILTER ELEMENT (M548A1) --
0337 00
Continued
INSTALLATION
NOTE
Fill oil filter body with oil (WP 0128 00) after oil filter element has been installed and prior to
installing oil filter head.
1.
Install new oil filter element with preformed packing (1) in oil filter body (2).
2.
Install oil filter body (2) on oil filter head (3) with four washers (4), screws (5), and nuts (6). Tighten screws to 4-6 lb-ft
3.
After cleaning threads of drain plug (7), put a light coat of sealing compound on threads. Install drain plug in oil filter
body (2).
4.
Install oil filter (8) on mounting bracket (9) with two screws (10), washers (11), and nuts (12).
5.
Put antiseize compound on outside threads of reducer (13) and reducer (14). Install reducers in oil filter (8).
6.
Put antiseize compound on outside threads of elbow(15) and elbow(16). Install elbows in reducer (13) and reducer (14).
7.
Connect hose (17) to elbow (16). Connect hose (18) to elbow (15).
8.
Check differential oil level. Add oil if needed (WP 0128 00).