TM 9-2350-247-20-2
REPLACE FINAL DRIVE VENT, FILLER TUBE, AND FITTINGS (RIGHT SIDE) -- Continued
0329 00
INSTALLATION
1.
Clean elbow (1) and elbow (2) with cleaning compound.
2.
Coat threads of elbow (1) with antiseize compound. Install elbow (1) with new preformed packing (3) in final drive (4).
3.
Install filler tube (5) on elbow (1). Secure to final drive (4) with clamp (6), new tab washer (7), and screw (8). Tighten
nut (9) on elbow (1).
4.
Coat threads of elbow (2) with antiseize compound. Install elbow in final drive (4).
5.
Install vent tube (10) between elbow (2) and filler tube (5).
6.
Insert gauge rod (11) in filler tube (5) and turn to the right to lock in tube.
FOLLOW-THROUGH STEPS
1.
END OF TASK