TM 9-2350-247-20-2
REPLACE GOVERNOR ASSEMBLY (M548A3) -- Continued
0317 00
INSTALLATION
1.
Install new governor assembly (5) in transmission. Twist governor slightly to the right while inserting it into bore inside
transmission.
2.
Install brake adjustment cover (3) and new gasket (4) on transmission. Secure with four washers (2) and new
self-locking bolts (1). Tighten bolts to 204-240 lb-in (23-27 Nm) torque.
FOLLOW-THROUGH STEPS
1.
Install seat support (WP 0395 00).
2.
Install cab floor plates (WP 0395 00).
END OF TASK