TM 9-2350-247-20-2
ADJUST TRANSMISSION BRAKES (M548A3) -- Continued
0314 00
CAUTION
Cap screw does not require removal. Removal of cap screw may cause damage to equipment.
NOTE
If indicator stopped before APPLY mark, brakes are too tight. If indicator stopped past APPLY
mark, brakes need to be tightened.
3.
Loosen cap screw (7) to release spring tension on brake adjustment sleeve (8). Turn brake adjustment sleeve inside
transmission. If indicator has passed READJUST mark, turn wrench to the right to tighten. If indicator did not reach
APPLY mark, turn wrench to left to loosen.
4.
5.
Repeat Step 3 and as needed until indicator stops at APPLY mark.
0314 00-2