TM 9-2350-247-20-2
ADJUST TRANSMISSION STEERING (M548A3) -- Continued
0312 00
ADJUSTMENT
WARNING
Stop engine before making adjustment (see your -10).
CAUTION
Care must be taken to keep tools from falling into transmission during adjustment procedures.
NOTE
If there is any change in track tension or if there is any hydrostatic noise from the transmission
at any speed, the steering unit needs adjustment.
1.
Remove access plug (1) and preformed packing (2) from steering centering adjustment on left rear of transmission.
Discard preformed packing.
NOTE
Be careful not to turn adjusting screw when loosening jam nut.
2.
Loosen jam nut (3) on adjusting screw (4). Use steer centering adjusting tool.