REPLACE TOW START CABLE/COVER (M548A3) -- Continued
When pulling tow start cable assembly through the mounting hole in the bracket, do not let the
securing nut or washer fall off the end and get lost.
10. Pull tow start cable assembly (6) through the mounting hole in bracket (13). Remove nut (12), washer (14), and tow start
cable assembly (6) from carrier.
11. Remove two screws (15) and washers (16) that secure remote control lever (17) to transmission. Remove remote control
lever from carrier.
12. Remove cotter pin (18) from headed pin (19). Discard cotter pin.
13. Remove remote control lever (20) from remote control lever (17).