TM 9-2350-247-20-2
REPLACE TRANSMISSION SHIFT CONTROL (M548A3)
THIS WORK PACKAGE COVERS:
INITIAL SETUP:
Maintenance Level
References
Unit
See your -10
Tools and Special Tools
Equipment Condition
General Mechanic's Tool Kit (WP 0541 00, Item 57)
Engine stopped (see your -10)
Personnel Required
Carrier blocked (see your -10)
Unit Mechanic
REMOVAL
1.
Disconnect wiring harness (1) from transmission shift control (2).
2.
Remove four screws (3) and washers (4) that secure transmission shift control (2) to bracket (5). Remove transmission
shift control from carrier.
3.
If mounts (6) are damaged, remove four screws (7) and washers (8) from under bracket (5) and remove mounts.