TM 9-2350-247-20-2
REPLACE TRAILER WIRING HARNESS -- Continued
0301 00
INSTALLATION
1.
Thread trailer wiring harness (1) with receptacle (2) attached through tailgate.
2.
Place cover (3) over end of receptacle (2). Attach cover to tailgate with four screws (4).
3.
Place connector (5), thread end first, on trailer wiring harness (1). Install connector in tailgate.
4.
Place spring (6) on trailer wiring harness (1). Place connector (7), knurled end first, on harness. Push harness through
bulkhead. Install connector in bulkhead.
5.
Place four connector shells (8), one on each lead, over contacts (9) on ends of circuit leads 21 (10), 22 (11), 23 (12), and
24 (13). Secure shells to leads with four washers (14).