TM 9-2350-247-20-2
REPLACE BATTERIES AND BATTERY COMPARTMENT (M548A1) -- Continued
0290 00
WARNING
Ventilate battery compartment before you connect or remove battery cables. Always disconnect
or connect negative lead first. Don't cause sparks. Hydrogen explosions can cause serious
injury.
Do not wear jewelry. It can get caught, cause electrical burns, or may cause electrocution.
5.
Connect battery jumper lead (18) to battery (9) positive post and battery (10) negative post. Tighten two nuts (19) to
secure lead.
6.
Connect circuit 2 lead (20) and circuit lead (21) to battery (10) positive post. Tighten nut (22) to secure leads.
7.
Connect circuit 7 lead (23) to battery (9) negative post. Tighten nut (24) to secure lead.
FOLLOW-THROUGH STEPS
1.
Lower driver's seat (see your -10).
2.
Turn MASTER SWITCH ON to check that battery is installed correctly. Master switch light should come on
(see your -10).
3.
Start engine (see your -10).
4.
Stop engine (see your -10).
END OF TASK
0290 00-7/8 blank