TM 9-2350-247-20-2
REPLACE HIGH BEAM INDICATOR LIGHT
THIS WORK PACKAGE COVERS:
INITIAL SETUP:
Maintenance Level
References
Unit
See your -10
Tools and Special Tools
Equipment Condition
General Mechanic's Tool Kit (WP 0541 00, Item 57)
Engine stopped (see your -10)
Carrier blocked (see your -10)
Personnel Required
Unit Mechanic
REMOVAL
1.
Disconnect circuit 519 lead (1) and circuit 519A lead (2) from light body (3).
2.
Press and turn light lens (4) to the left and remove with gasket (5) from instrument panel (6).
3.
Press and turn light bulb (7) to the left and remove from light body (3).
4.
Remove two screws (8) and washers (9) from light body (3) and instrument panel (6). Remove light body from panel.
INSTALLATION
1.
Install light body (3) in instrument panel (6). Install two washers (9) and screws (8) to secure light body to panel.
2.
Place light bulb (7) in light body (3). Press and turn light bulb to the right to secure.
3.
Place light lens (4) with gasket (5) on instrument panel (6). Press and turn light lens to the right.
4.
Connect circuit 519A lead (2) and circuit 519 lead (1) light body (3).