TM 9-2350-247-20-2
REMOVE/INSTALL INSTRUMENT PANEL (PARTIAL) -- Continued
0256 00
INSTALLATION
NOTE
If wiring harness clamps were loosened behind instrument panel, tighten clamps.
1.
Connect tachometer flexible shaft (1) at back of tachometer (2).
2.
Connect speedometer flexible shaft (3) at back of speedometer (4).
3.
Place instrument panel (5) on four bulkhead mounts. Secure with four screws (6), eight washers (7), negative lead (8),
new lock washer (9), and four new lock nuts (10).