REPLACE COOLING FAN IDLER ARM (M548A3)
THIS WORK PACKAGE COVERS:
See your -10
Tools and Special Tools
General Mechanic's Tool Kit (WP 0541 00, Item 57)
Engine stopped (see your -10)
Carrier blocked (see your -10)
Power plant rear access panel removed
(see your -10)
Top access cover and grilles removed (see your -10)
Remove cotter pin (1) and straight pin (2) from sleeve (3) and fan idler arm (4). Discard cotter pin.
Remove adjusting assembly (5) from fan idler arm (4).
Remove lock nut (6), washer (7), screw (8). and fan idler arm (4) from idler arm support (9).
Remove grease fitting (10) if required.