TM 9-2350-247-20-2
REPLACE AIR CLEANER ASSEMBLY AND RELATED PARTS (M548A3) -- Continued
0159 00
INSTALLATION
1.
Install mounting bracket (9) on duct assembly (5) and secure with two screws (8), four washers (7) and two new lock
nuts (6). Tighten screws to 25 to 27 lb-ft (34 to 37 Nm) torque.
2.
Position air cleaner (4) on duct assembly (5) and secure with 10 screws (3), 20 washers (2), and 10 new lock nuts (1).
Tighten lock nuts to 81 to 91 lb-in (10 to 11 Nm) torque.
3.
Position air cleaner (4) and duct assembly (5) in carrier and secure with two new water-lubricated mounts (10), washers
(11), and screws (12).
4.
Install filter (13), reducer (14), and tee (15) on air cleaner head (16).
5.
Install reducer (14), elbow (17), and elbow (18) on tee (15).
6.
Connect cold start air pump hose (19) to elbow (17) and air restrictor indicator hose (20) to elbow (18).