TM 9-2350-247-20-1
SERVICE UPON RECEIPT OF MATERIEL Continued
0127 00
e.
Lube ring mount (WP 0128 00).
f.
Perform Before PMCS (see your -10).
M548A1/M548A3 M66 RING MOUNT KIT DEPROCESSING PROCEDURES
1.
General procedures:
a.
Check material to make sure it is ready for use. Clean, lube as needed, and prepare material for service.
b.
List missing or damaged parts and any malfunctions.
c.
Report serious problems on DA Form 2404.
2.
Specific procedures:
a.
Unpackage and inventory gun mount kit parts against packing list and TM 9-1005-245-14.
b.
Assemble ring mount. See TM 9-1005-245-14.
c.
Install supports and ring mount (WP 0514 00).
d.
Install deflector support and cartridge deflector (WP 0514 00).
e.
Install machine gun mount. See TM 9-1005-245-14.
f.
Lube gun mount (WP 0128 00).
g.
Perform Before PMCS (see your -10).
M548A1/M548A3 7.62 MM MACHINE GUN MOUNT KIT DEPROCESSING PROCEDURES
1.
General procedures:
a.
Check material to make sure it is ready for use. Clean, lube as needed, and prepare material for service.
b.
List missing or damaged parts and any malfunctions.
c.
Report serious problems on DA Form 2404.
2.
Specific procedures:
a.
Unpackage and inventory machine gun mount kit parts against packing list and RPSTL.
b.
Install M66 gun mount kit (WP 0514 00). Omit deflector and tripod brackets.
c.
Install 7.62 mm gun mount (WP 0515 00).
d.
Perform Before PMCS (see your -10).
e.
Perform After PMCS (see your -10).
M548A1/M548A3 MATERIAL HANDLING KIT DEPROCESSING PROCEDURES
1.
General procedures:
a.
Check material to make sure it is ready for use. Clean and prepare material for service.
b.
List missing or damaged parts and any malfunctions. Correct deficiencies.
c.
Report serious deficiencies which appear to involve unsatisfactory design or material on SF-368, Quality
Deficiencies Report.
2.
Specific procedures:
a.
Unpack and inventory material handling kit parts against packing list and RPSTL.
0127 00-5