SERVICE UPON RECEIPT OF MATERIEL Continued
M548A1 AND M548A3 DEPROCESSING PROCEDURES
The shipping closure and attaching hardware are reusable items. Do not damage. Keep
attaching hardware with closure. Refer to your supervisor for disposition of these items.
One access panel is installed on each side of cab.
Remove shipping closure (1).
Remove six lag bolts (2), washers (3), and two side access panels (4) from two cab doors (5). Open cab doors.
Remove two nuts (6), four washers (7), two washers (8), screws (9), and front of shipping closure (1) from two
windshield mounting holes (10).
Remove two nuts (11), washers (12), washers (13), and rear of shipping closure (1) from two studs (14). Lift
shipping closure from carrier.
Before storage of shipping closure (1), install two side access panels on shipping closure with six washers (3) and
lag bolts (2).
Remove equipment packages from drivers cab. Packages contain windshield wiper blades and arms with attaching nuts,
exhaust pipe, and two hooks and pintle.