TM 9-2350-247-20-1
IN LEFT OR RIGHT TURN SIGNAL POSITION, INDIVIDUAL LIGHT DOES NOT
FLASHContinued
0067 00
2Y
1. Install light bulb in turn signal control unit (WP 0508 00).
2. Remove blackout stoplight-taillight bulb (1).
3. Connect multimeter to bulb (1) and check for continuity.
4. Does multimeter indicate any continuity?
YES
NO
2YN
1. Replace blackout stoplight-taillight
bulb (WP 0507 00).
2. Verify no faults found.
3Y
1. Install light bulb in blackout stoplight-taillight (WP 0507 00).
2. Disconnect circuit 23 connector (1) from blackout
stoplight-taillight.
3. Turn master switch ON (see your -10).
4. Connect multimeter between circuit 23 connector (1) and ground.
5. Does multimeter indicate voltage is present on circuit 23
connector (1)?
YES
NO
3YN
1. Repair wiring harness (WP 0294 00).
2. Verify no faults found.
4Y
1. Turn MASTER SWITCH OFF.
2. Connect circuit 23 connector to blackout stoplight-taillight.
3. Verify no faults found.
0067 00-2