TM 9-2350-247-10
MAINTENANCE OF CAB COVER AND WINDOWS Continued
0072 00
INSTALLATION
CAUTION
Make sure that the escape hatch ring or the plastic rear windows are not damaged, and that the
cab cover is dry and free of dirt, mildew, and rot.
1.
Unfold the cab cover and guide the rope bead into the groove in the cover mount. Then pull the cover sideways until its
in position over the cab.
2.
Spread the cab cover over the cab frame. Pull the cover tight across the front, so the cloth is smooth along the mount, and
snap the sides of the cab cover to the cab frame.
3.
Hook the tie down rope to the 12 cleats at the back of the cab. Tighten the rope and tie it in place.
ESCAPE HATCH COVER
1.
The cab escape hatch cover works exactly the same as the cargo compartment escape hatch cover. See the picture and
instructions in WP 0071 00. The cab escape hatch cover has a retainer at the rear that keeps it fastened to the cab cover
when you open it.
0072 00-2