TM 9-2350-247-10
REMOVE/INSTALL POWER PLANT REAR ACCESS COVERS/DOOR AND PANEL
Continued
0036 00
INSTALL UPPER REAR ACCESS DOOR (M548A1)
NOTE
Lower rear cover must be installed before upper rear door is closed.
1.
Release strap and hook. Swing door down and closed.
2.
Secure door to bulkhead with four screws and washers. Use socket and socket handle.
3.
Install plywood protector if removed (WP 0078 00).
REMOVE REAR ACCESS PANEL (M548A3)
NOTE
Remove cargo compartment floor plate if required (WP 0007 00).
1.
Remove two screws and washers from top of rear access panel. Use socket and socket handle.
2.
Remove six screws and washers from bottom and sides of rear access panel. Use socket and socket handle.
3.
Remove rear access panel from rear power plant compartment bulkhead.
0036 00-4