LO 9-2350-266-12
LUBRICATION ORDER
19 March 1990
Supersedes LO 9-2350-266-12, dated 10 April 85.
CARRIER, PERSONNEL, FULL TRACKED,
ARMORED FIRE SUPPORT,
References: TM 9-2350-266-10, TM 9-2350-266-20, TM 9-2350-261-20, TB 43-0210, and CL9100SL
KEY
EXPECTED
T E M P E R A T U R E#
CAPAC-
+ 4 0 F 0F to INTERVALS
Above
to
ITIES
+32F
65F
COMPONENTS
(AP-
(Above
10F (18C
to
PROX)
OC)
(+5C
t o 54C)
23C)
D Daily
LUBRICAT-
OEA
OE/HDO
OE/
OE/
HDO-
HDO-
OC On-
(MIL-L-2104D) ING OIL,
OR
Condi-
INTERNAL
15/40
15/40
tion
OEA
(MIL-L-46167) ENGINE
18 qts
Engine
(MIL-L-21260) PRESERVA-
PE-
PE-
TION OIL
30-1
30-1
# FOR ARCTIC OPERATION REFER TO FM 9-207
NOTES:
1.
When OE/HDO is used, this must NOT be mixed with single grade Iubricants.
2. Complete oil change with filters is requred when converting from OE/HDO to OEA (PE-30-1
to OE/HDO or OEA; OEA to OE/HDO, etc.) in accordance with Key.
CAUTION
Engine can be damaged when engine is filled above F (full) mark.
NOTE
Park carrier on level ground to check oil levels. Check/lubricate all oil and grease
fitting points after washing or fording.
3. ENGINE OIL LEVEL. Before starting engine, check for oil level between F (full) and L (low)
marks on gauge rod. Add oil as necessary. Oil level should not be above F mark.
Card 5 of 51/(52 blank)